Table of Contents
Advertisement
3. Dhcpv6 server option basic functions configuration
Command
Global mode
ipv6 dhcp server remote-id option
no ipv6 dhcp server remote-id option
ipv6 dhcp server subscriber-id option
no ipv6 dhcp server subscriber-id option
ipv6 dhcp use class
no ipv6 dhcp use class
ipv6 dhcp class <class-name>
no ipv6 dhcp class <class-name>
Interface configuration mode
ipv6 dhcp server select relay-forw
no ipv6 dhcp server select relay-forw
a length of less than 128. The
no operation restores
subscriber-id in option 38 to
vlan name together with port
name such as
"Vlan2+Ethernet1/2".
Description
This command enables
DHCPv6 server to support the
identification of option 37, the
no form of this command
disables it.
This command enables
DHCPv6 server to support the
identification of option 38, the
no form of this command
disables it.
This command enables
DHCPv6 server to support the
using of DHCPv6 class during
address assignment, the no
form of this command disables
it without removing the relative
DHCPv6 class information that
has been configured.
This command defines a
DHCPv6 class and enters
DHCPv6 class mode, the no
form of this command removes
this DHCPv6 class.
This command enables the
DHCPv6 server to support
selections when multiple
35-68
Advertisement
Table of Contents
Troubleshooting
