Vlan-Translation Configuration - Planet WGSW-52040 Configuration Manual

Application and configuration of VLAN translation will be explained in detail in this section.

20.4.2 VLAN-translation Configuration

Configuration task sequence of VLAN-translation:
1. Configure the VLAN-translation function on the port
2. Configure the VLAN-translation relations on the port
3. Configure whether the packet is dropped when checking VLAN-translation is failing
4. Show the related configuration of vlan-translation
1. Configure the VLAN-translation of the port
Command
Port mode
vlan-translation enable
no vlan-translation enable
2. Configure the VLAN-translation relation of the port
Command
Global/Port mode
vlan-translation <old-vlan-id> to
<new-vlan-id> in
no vlan-translation old-vlan-id in
3. Configure whether the packet is dropped when checking VLAN-translation is failing
Command
Port mode
vlan-translation miss drop {in | out | both}
no vlan-translation miss drop {in | out |
both}
Explanation
Enter/exit the port VLAN-translation
mode.
Explanation
Add/delete a VLAN-translation relation.
Explanation
Configure the VLAN-translation packet
dropped on port if there is any failure.
20-88