Lldp-Med Example - Planet WGSW-52040 Configuration Manual

48-port 10/100/1000base-t + 4-port 100/1000x sfp managed switch

Hide thumbs Also See for WGSW-52040:

Table of Contents

17.3 LLDP-MED Example

Figure 17-1: Basic LLDP-MED configuration topology

1) Configure Switch A

SwitchA(config)#interface ethernet1/1

SwitchA (Config-If-Ethernet1/1)# lldp enable

SwitchA (Config-If-Ethernet1/1)# lldp mode both（this configuration can be omitted, the

default mode is RxTx）

SwitchA (Config-If-Ethernet1/1)# lldp transmit med tlv capability

SwitchA (Config-If-Ethernet1/1)# lldp transmit med tlv network policy

SwitchA (Config-If-Ethernet1/1)# lldp transmit med tlv inventory

SwitchB (Config-If-Ethernet1/1)# network policy voice tag tagged vid 10 cos 5 dscp 15

SwitchA (Config-If-Ethernet1/1)# exit

SwitchA (config)#interface ethernet1/2

SwitchA (Config-If-Ethernet1/2)# lldp enable

SwitchA (Config-If-Ethernet1/2)# lldp mode both

2) Configure Switch B

SwitchB (config)#interface ethernet1/1

SwitchB(Config-If-Ethernet1/1)# lldp enable

SwitchB (Config-If-Ethernet1/1)# lldp mode both

SwitchB (Config-If-Ethernet1/1)# lldp transmit med tlv capability