Table of Contents
Advertisement
7. Configure the spanning-tree attribute of port
Command
Port Mode
spanning-tree cost
no spanning-tree cost
spanning-tree port-priority
no spanning-tree port-priority
spanning-tree rootguard
no spanning-tree rootguard
Global Mode
spanning-tree transmit-hold-count
<tx-hold-count-value>
no spanning-tree transmit-hold-count
spanning-tree cost-format {dot1d | dot1t}
8. Configure the snooping attribute of authentication key
Command
Port Mode
spanning-tree digest-snooping
no spanning-tree digest-snooping
9. Configure the FLUSH mode once topology changes
Command
Global Mode
Explanation
Set the port path cost.
Set the port priority.
Set the port is root port.
Set the max transmit-hold-count of
port.
Set port cost format with dot1d or
dot1t.
Explanation
Set the port to use the authentication
string of partner port. The no
command restores to use the
generated string.
Explanation
22-123
Advertisement
Table of Contents
Troubleshooting
