Table of Contents
Advertisement
Layer3 Function
Static Route
Layer2 Function
Port Configuration
Port Status
VLAN
Bandwidth Control
Link Aggregation
QoS
Multicast
Access Control List
Supports SNMPv1 / v2c / v3
Supports Security IP safety net management function: avoid unlawful landing at
nonrestrictive area
Supports Syslog server for IPv4 and IPv6
Supports TACACS+
Support maximum 128 static routes
Port disable/enable.
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection.
Flow Control disable / enable.
Bandwidth control on each port
Port Loopback detect
Display each port's speed duplex mode, link status, flow control status, and
auto negotiation status.
802.1Q Tagged Based VLAN, up to 256 VLAN groups
Q-in-Q
GVRP for VLAN Management
Private VLAN Edge (PVE) supported
Protocol-based VLAN
MAC-based VLAN
IP Subnet VLAN
TX / RX / Both
IEEE 802.3ad LACP / static trunk
Supports 32 groups of 8-port trunk
8 priority queues on all switch ports
Supports strict priority and Weighted Round Robin (WRR) CoS policies
Traffic classification:
- IEEE 802.1p CoS / ToS
- IPv4 / IPv6 DSCP
- Port-based WRR
IGMP v1/ v2 / v3 snooping
Querier mode support
MLDv1 / v2, MLD v1/v2 snooping
Querier mode support
Multicast VLAN Register (MVR)
Supports standard and expanded ACL
IP-based ACL / MAC-based ACL
Time-based ACL
1-6
Advertisement
Table of Contents
Troubleshooting
