Mac Notification Example; Mac Notification Troubleshooting - Planet WGSW-52040 Configuration Manual

48-port 10/100/1000base-t + 4-port 100/1000x sfp managed switch
Hide thumbs Also See for WGSW-52040:
Table of Contents

Advertisement

show mac-notification summary
7. Clear the statistics of MAC notification trap
Command
Admin mode
clear mac-notification statistics

21.6.3 MAC Notification Example

IP address of network management station (NMS) is 1.1.1.5, IP address of Agent is 1.1.1.9.
NMS will receive Trap message from Agent. (Note: NMS may set the authentication to the
community character string of trap, suppose the community character string as usertrap)
Configuration procedure in the following:
Switch(config)#snmp-server enable
Switch(config)#snmp-server enable traps mac-notification
Switch(config)# mac-address-table notification
Switch(config)# mac-address-table notification interval 5
Switch(config)# mac-address-table notification history-size 100
Switch(Config-If-Ethernet1/4)# mac-notification both

21.6.4 MAC Notification Troubleshooting

Check whether trap message is sent successfully by show command and debug command of
snmp.
Show the configuration and the data
of MAC notification.
Explanation
Clear the statistics of MAC
notification trap.
21-116

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents