Forward Or Filter - Planet WGSW-52040 Configuration Manual

is the default aging time for MAC address entry in switch. Aging time can be modified in
switch.

21.1.2 Forward or Filter

The switch will forward or filter received data frames according to the MAC table. Take the
above figure as an example, assuming switch have learnt the MAC address of PC1 and PC3,
and the user manually configured the mapping relationship for PC2 and PC4 to ports. The
MAC table of switch will be:
MAC Address
00-01-11-11-11-11
00-01-22-22-22-22
00-01-33-33-33-33
00-01-44-44-44-44
1． Forward data according to the MAC table
If PC1 sends a message to PC3, the switch will forward the data received on port 1/5 from
port1/12.
2． Filter data according to the MAC table
If PC1 sends a message to PC2, the switch, on checking the MAC table, will find PC2 and PC1
are in the same physical segment and filter the message (i.e. drop this message).
Three types of frames can be forwarded by the switch:
Broadcast frame

 Multicast frame
 Unicast frame
The following describes how the switch deals with all the three types of frames:
1． Broadcast frame: The switch can segregate collision domains but not broadcast
domains. If no VLAN is set, all devices connected to the switch are in the same
broadcast domain. When the switch receives a broadcast frame, it forwards the frame
in all ports. When VLANs are configured in the switch, the MAC table will be adapted
accordingly to add VLAN information. In this case, the switch will not forward the
received broadcast frames in all ports, but forward the frames in all ports in the same
VLAN.
2． Multicast frame: For the unknown multicast, the switch will broadcast it in the same
vlan, but the switch only forwards the multicast frames to the multicast group's port if
IGMP Snooping function or the static multicast group has been configured.
3． Unicast frame: When no VLAN is configured, if the destination MAC addresses are in
Port number
1/5
1/5
1/12
1/12
21-108
Entry added by
Dynamic learning
Static configuration
Dynamic learning
Static configuration