Planet WGSW-52040 Configuration Manual page 80

2． Create cluster
1) Configure private IP address pool for member switches of the cluster
2) Create or delete cluster
3) Add or remove a member switch
3． Configure attributes of the cluster in the commander switch
1) Enable or disable automatically adding cluster members
2) Set automatically added members to manually added ones
3) Set or modify the time interval of keep-alive messages on switches in the cluster.
4) Set or modify the max number of lost keep-alive messages that can be tolerated
5) Clear the list of candidate switches maintained by the switch
4． Configure attributes of the cluster in the candidate switch
1) Set the time interval of keep-alive messages of the cluster
2) Set the max number of lost keep-alive messages that can be tolerated in the cluster
5． Remote cluster network management
1) Remote configuration management
2) Remotely upgrade member switch
3) Reboot member switch
6． Manage cluster network with web
1) Enable http
7． Manage cluster network with snmp
1) Enable snmp server
1. Enable or disable cluster
Command
Global Mode
cluster run [key <WORD>] [vid <VID>]
no cluster run
Explanation
Enable or disable cluster function in
the switch.
6-2