Mld Snooping Examples - Planet WGSW-52040 Configuration Manual

query-mrsp
ipv6 mld snooping vlan <vlan-id>
query-robustness <value>
no ipv6 mld snooping vlan <vlan-id>
query-robustness
ipv6 mld snooping vlan <vlan-id>
suppression-query-time <value>
no ipv6 mld snooping vlan <vlan-id>
suppression-query-time
Ipv6 mld snooping vlan <vlan-id>
static-group <X:X::X:X> [source
<X:X::X:X>] interface [ethernet |
port-channel] <IFNAME>
no ipv6 mld snooping vlan <vlan-id>
static-group <X:X::X:X> [source
<X:X::X:X>] interface [ethernet |
port-channel] <IFNAME>

39.1.3 MLD Snooping Examples

Scenario 1: MLD Snooping Function
Group1
Figure 39-1: Open the switch MLD Snooping Function figure
As shown above, the vlan 100 configured on the switch consists of ports 1, 2, 6, 10 and 12.
Four hosts are respectively connected to 2, 6, 10 and 12 while the multicast router on port 1.
Configure the query robustness, the "no"
form of this command restores to the default.
Configure the suppression query time. The
"no" form of this command restores to the
default
Configure static-group on specified port of
the VLAN. The no form of the command
cancels this configuration.
Multicast Router
Mrouter Port
Group1 Group1 Group2
39-105
MLD Snooping
Switch