Table of Contents
Advertisement
56.2 ULPP Configuration Task List
1. Create ULPP group globally
2. Configure ULPP group
3. Show and debug the relating information of ULPP
1. Create ULPP group globally
Command
Global mode
ulpp group <integer>
no ulpp group <integer>
2.
Configure ULPP group
Command
ULPP group configuration mode
preemption mode
no preemption mode
preemption delay <integer>
no preemption delay
control vlan <integer>
no control vlan
protect vlan-reference-instance
<instance-list>
no protect vlan-reference-instance
<instance-list>
flush enable mac
flush disable mac
flush enable arp
flush disable arp
flush enable mac-vlan
flush disable mac-vlan
Expalnation
Configure and delete ULPP group
globally.
Explanation
Configure the preemption mode of
ULPP group. The no operation
deletes the preemption mode.
Configure the preemption delay, the
no operation restores the default
value 30s.
Configure the sending control VLAN,
no operation restores the default
value 1.
Configure the protection VLANs, the
no operation deletes the protection
VLANs.
Enable or disable sending the flush
packets which update MAC address.
Enable or disable sending the flush
packets which delete ARP.
Enable or disable sending the flush
packets of deleting the dynamic
unicast mac according to vlan.
56-22
Advertisement
Table of Contents
Troubleshooting
