3. Configure remote failure
Command
Port mode
ethernet-oam remote-failure
no ethernet-oam remote-failure
ethernet-oam errored-symbol-period
threshold high {high-symbols | none}
no ethernet-oam errored-symbol-period
threshold high
ethernet-oam errored-frame-period threshold
high {high-frames | none}
no ethernet-oam errored-frame-period
threshold high
ethernet-oam errored-frame threshold high
{high-frames | none}
no ethernet-oam errored-frame threshold high
ethernet-oam errored-frame-seconds
threshold high {high-frame-seconds | none}
no ethernet-oam errored-frame-seconds
threshold high
Explanation
Enable remote failure detection of
EFM OAM (failure means
critical-event or link-fault event of the
local), no command disables the
function. (optional)
Configure the high threshold of
errored symbol period event, no
command restores the default value.
(optional)
Configure the high threshold of
errored frame period event, no
command restores the default value.
(optional)
Configure the high threshold of
errored frame event, no command
restores the default value. (optional)
Configure the high threshold of
errored frame seconds event, no
command restores the default value.
(optional)
14-46