Chapter 13 Mtu Configuration; Introduction To Mtu; Mtu Configuration Task Sequence - Planet WGSW-52040 Configuration Manual

48-port 10/100/1000base-t + 4-port 100/1000x sfp managed switch

Hide thumbs Also See for WGSW-52040:

Table of Contents

Chapter 13 MTU Configuration

So far the Jumbo (Jumbo Frame) has not reach a determined standard in the industry

(including the format and length of the frame). Normally frames sized within 1519-9000 should

be considered jumbo frame. Networks with jumbo frames will increase the speed of the whole

network by 2% to 5%. Technically the Jumbo is just a lengthened frame sent and received by

the switch. However considering the length of Jumbo frames, they will not be sent to CPU. We

discard the Jumbo frames sent to CPU in the packet receiving process.

1. Configure enable MTU function

mtu [<mtu-value>]

no mtu enable

Configure the MTU size of JUMBO frame,

enable the receiving/sending function of

JUMBO frame. The no command disables

sending and receiving function of MTU