Pppoe Intermediate Agent Typical Application - Planet WGSW-52040 Configuration Manual

pppoe intermediate-agent type
self-defined remote-id {mac | hostname|
string WORD}
no pppoe intermediate-agent type
self-defined remote-id
pppoe intermediate-agent delimiter
<WORD>
no pppoe intermediate-agent delimiter
pppoe intermediate-agent format
(circuit-id | remote-id) (hex | ascii)
no pppoe intermediate-agent format
(circuit-id | remote-id)
Port Mode
pppoe intermediate-agent
no pppoe intermediate-agent
pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag
strip
pppoe intermediate-agent trust
no pppoe intermediate-agent trust
pppoe intermediate-agent circuit-id
<string>
no pppoe intermediate-agent circuit-id
pppoe intermediate-agent remote-id
<string>
no pppoe intermediate-agent remote-id

51.3 PPPoE Intermediate Agent Typical Application

PPPoE Intermediate Agent typical application is as follows:
Figure 51-4: PPPoE IA typical application
51-200
Configure the self-defined remote-id.
Configure the delimiter among the fields
in circuit-id and remote-id
Configure the format with hex or ASCII
for circuit-id and remote-id.
Enable PPPoE Intermediate Agent
function of port.
Set vendor tag strip function of port.
Set a port as trust port.
Set circuit-id of port.
Set remote-id of port.