Planet WGSW-52040 Configuration Manual page 141

{description-language | province-state | city | county
| street | locationNum | location | floor | room |
postal | otherInfo} <address>
no {description-language | province-state | city |
county | street | locationNum | location | floor | room
| postal | otherInfo}
Global mode
lldp med fast count <value>
no lldp med fast count
Admin mode
show lldp
show lldp [interface ethernet <IFNAME>]
show lldp neighbors [interface ethernet <IFNAME>]
Configure the detailed address
after enter Civic Address LCI
address mode of the port.
When the fast LLDP-MED
startup mechanism is enabled,
it needs to fast send the LLDP
packets with LLDP-MED TLV,
this command is used to set
the value of the fast sending
packets, the no command
restores the default value.
Show the configuration of the
global LLDP and LLDP-MED.
Show the configuration of
LLDP and LLDP-MED on the
current port.
Show LLDP and LLDP-MED
configuration of the neighbors.
17-63