Planet WGSW-52040 Configuration Manual page 483

Global Mode
ntp server {<ip-address> |
<ipv6-address>} [version <version_no>]
[key <key-id>]
no ntp server {<ip-address> |
<ipv6-address>}
3. To configure the max number of broadcast or multicast servers supported by the NTP client
Command
Global Mode
ntp broadcast server count <number>
no ntp broadcast server count
4. To configure time zone
Command
Global Mode
clock timezone WORD {add | subtract}
<0-23> [<0-59>]
no clock timezone WORD
5. To configure NTP access control list
Command
Global Mode
ntp access-group server <acl>
no ntp access-group server < acl>
6. To configure NTP authentication
Command
Global Mode
ntp authenticate
no ntp authenticate
To enable the specified time server of time
source.
Explication
Set the max number of broadcast or
multicast servers supported by the NTP
client. The no operation will cancel the
configuration and restore the default value.
Explication
This command configures timezone in
global mode, the no command deletes the
configured timezone.
Explication
To configure NTP server access control list.
Explication
To enable NTP authentication function.
63-54