Table of Contents
Advertisement
1.
Enable or disable SAVI function
Command
Global mode
savi enable
no savi enable
2.
Enable or disable application scene function for SAVI
Command
Global mode
savi ipv6 {dhcp-only | slaac-only |
dhcp-slaac} enable
no savi ipv6 {dhcp-only | slaac-only |
dhcp-slaac} enable
3.
Configure SAVI binding function
Command
Global mode
savi ipv6 check source binding ip
<ip-address> mac <mac-address>
interface <if-name> {type [slaac | dhcp]
lifetime <lifetime> | type static}
no savi ipv6 check source binding ip
<ip-address> interface <if-name>
4.
Configure the global max-dad-delay for SAVI
Command
Global mode
savi max-dad-delay <max-dad-delay>
no savi max-dad-delay
5.
Configure the global max-dad-prepare-delay for SAVI
Command
Global mode
Explanation
Enable the global SAVI function, no
command disables the function.
Explanation
Enable the application scene function for
SAVI, no command disables the function.
Explanation
Configure a static or dynamic binding
manually, no command deletes the
configured binding. This command may
be configured in a global function of savi
enable, slaac-only enable, dhcp-only
enable or dhcp-slaac enable.
Explanation
Configure the max lifetime period of SAVI
binding at DETECTION state, no
command restores the default value.
Explanation
54-6
Advertisement
Table of Contents
Troubleshooting
