Planet WGSW-52040 Configuration Manual page 398

2. Configure the RADIUS authentication key
Command
Global Mode
radius-server key {0 | 7} <string>
no radius-server key
3. Configure the RADIUS server
Command
Global Mode
radius-server authentication host
{<ipv4-address> | <ipv6-address>} [port
<port-number>] [key {0 | 7} <string>]
[primary] [access-mode {dot1x | telnet}]
no radius-server authentication host
{<ipv4-address> | <ipv6-address>
radius-server accounting host
{<ipv4-address> | <ipv6-address>} [port
<port-number>] [key {0 | 7} <string>]
[primary]
no radius-server accounting host
{<ipv4-address> | <ipv6-address>}
4. Configure the parameter of the RADIUS service
Command
Global Mode
radius-server dead-time <minutes>
no radius-server dead-time
radius-server retransmit <retries>
no radius-server retransmit
Explanation
To configure the encryption key for the
RADIUS server. The no form of this
command will remove the configured key.
Explanation
Specifies the IPv4/IPv6 address and the
port number, whether be primary server for
RADIUS accounting server; the no
command deletes the RADIUS accounting
server.
Specifies the IPv4/IPv6 address and the
port number, whether be primary server for
RADIUS accounting server; the no
command deletes the RADIUS accounting
server.
Explanation
To configure the interval that the RADIUS
becomes available after it is down. The no
form of this command will restore the
default configuration.
To configure retry times for the RADIUS
packets. The no form of this command
restores the default configuration.
47-177