Table of Contents
Advertisement
savi ipv6 mac-binding-limit
<limit-num>
no savi ipv6 mac-binding-limit
11. Configure the check mode for SAVI conflict binding
Command
Global mode
savi check binding <simple | probe>
mode
no savi check binding mode
12. Enable or disable user authentication
Command
Port mode
savi ipv6 check source [ip-address
mac-address | ip-address |
mac-address]
no savi ipv6 check source
13. Enable or disable DHCPv6 trust of port
Command
Port mode
ipv6 dhcp snooping trust
no ipv6 dhcp snooping trust
14. Enable or disable ND trust of port
Command
Port mode
ipv6 nd snooping trust
no ipv6 nd snooping trust
Configure the corresponding dynamic
binding number for the same MAC
address, no command restores the
default value. Note: The binding number
only limits the dynamic binding, but does
not limit the static binding number.
Explanation
Configure the check mode for the
conflict binding, no command deletes
the check mode.
Explanation
Enable the control authentication
function for user, no command disables
the function.
Explanation
Enable DHCPv6 trust port, no command
disables the trust function. (port is
translated from trust port into untrust port)
Explanation
Configure a port as slaac trust and RA
trust, no command deletes the port's trust
function.
54-8
Advertisement
Table of Contents
Troubleshooting
