Rspan Configuration Task List - Planet WGSW-52040 Configuration Manual

60.2 RSPAN Configuration Task List

1. Configure RSPAN VLAN
2. Configure mirror source port（cpu）
3. Configure mirror destination port
4. Configure reflector port
5. Configure remote VLAN of mirror group
1. Configure RSPAN VLAN
Command
VLAN Configuration Mode
remote-span
no remote-span
2. Configure mirror source port(CPU)
Command
Global Mode
monitor session <session> source
{interface <interface-list> | cpu [slot
<slotnum>]} {rx| tx| both}
no monitor session <session> source
{interface <interface-list> | cpu [slot
<slotnum>]}
3. Configure mirror destination port
Command
Global Mode
monitor session <session> destination
interface <interface-number>
no monitor session <session>
destination interface <interface-number>
4. Configure reflector port
Explanation
To configure the specified VLAN as RSPAN
VLAN. The no command will remove the
configuration of RSPAN VLAN.
Explanation
To configure mirror source port; The no
command deletes the mirror source port.
Explanation
To configure mirror destination interface; The
no command deletes the mirror destination
port.
60-41