Table of Contents
Advertisement
no lldp transmit med tlv networkPolicy
lldp transmit med tlv extendPoe
no lldp transmit med tlv extendPoe
lldp transmit med tlv inventory
no lldp transmit med tlv inventory
network policy {voice | voice-signaling | guest-voice
| guest-voice-signaling | softphone-voice |
video-conferencing | streaming-video |
video-signaling} [status {enable | disable}] [tag
{tagged | untagged}] [vid {<vlan-id> | dot1p}] [cos
<cos-value>] [dscp <dscp-value> ]
no network policy {voice | voice-signaling |
guest-voice | guest-voice-signaling |
softphone-voice | video-conferencing | streaming-
video | video-signaling}
civic location {dhcp server | switch | endpointDev}
<country-code>
no civic location
ecs location <tel-number>
no ecs location
lldp med trap {enable | disable}
Civic Address LCI address mode
send LLDP-MED Network
Policy TLV. The no command
disables the capability.
Configure the specified port to
send LLDP-MED Extended
Power-Via-MDI TLV. The no
command disables the
capability.
Configure the port to send
LLDP-MED Inventory
Management TLVs. The no
command disables the
capability.
Configure network policy of the
port, including VLAN ID, the
supported application (such as
voice and video), the
application priority and the
used policy, and so on.
Configure device type and
country code of the location
with Civic Address LCI format
and enter Civic Address LCI
address mode. The no
command cancels all
configurations of the location
with Civic Address LCI format.
Configure the location with
ECS ELIN format on the port,
the no command cancels the
configured location.
Enable or disable LLDP-MED
trap for the specified port.
17-62
Advertisement
Table of Contents
Troubleshooting
