Table of Contents
Advertisement
description <string>
no description
Port mode
ulpp control vlan <vlan-list>
no ulpp control vlan <vlan-list>
ulpp flush enable mac
ulpp flush disable mac
ulpp flush enable arp
ulpp flush disable arp
ulpp flush enable mac-vlan
3.
ulpp flush disable mac-vlan
and
ulpp group <integer> master
no ulpp group <integer> master
ulpp group <integer> slave
no ulpp group <integer> slave
debug the relating information of ULPP
Command
Admin mode
show ulpp group [group-id]
show ulpp flush counter interface
{ethernet <IFNAME> | <IFNAME>}
show ulpp flush-receive-port
clear ulpp flush counter interface
<name>
debug ulpp flush {send | receive}
interface <name>
no debug ulpp flush {send | receive}
interface <name>
debug ulpp flush content interface
<name>
no debug ulpp flush content interface
<name>
Configure or delete ULPP group
description.
Configure the receiving control
VLANs, no operation restores the
default value 1.
Enable or disable receiving the flush
packets which update the MAC
address.
Enable or disable receiving the flush
packets which delete ARP.
Enable or disable receiving the flush
packets of mac-vlan type.
Configure or delete the master port
of ULPP group.
Configure or delete the slave port of
ULPP group.
Explanation
Show the configuration information of the
configured ULPP group.
Show the statistic information of the flush
packets.
Show flush type and control VLAN received
by the port.
Clear the statistic information of the flush
packets.
Show the information of the receiving and
sending flush packets, the no operation
disables the shown information.
Show the contents of the received flush
packets, the no operation disables the
showing.
56-23
Show
Advertisement
Table of Contents
Troubleshooting
