Am Function Example - Planet WGSW-52040 Configuration Manual

48-port 10/100/1000base-t + 4-port 100/1000x sfp managed switch

Hide thumbs Also See for WGSW-52040:

Table of Contents

Global Configuration Mode

show am [interface <interface-name>]

44.3 AM Function Example

Figure 44-1: a typical configuration example of AM function

In the topology above, 30 PCs, after converged by HUB1, connect with interface1 on the

switch. The IP addresses of these 30 PCs range from 100.10.10.1 to 100.10.10.30.

Considering security, the system manager will only take user with an IP address within that

range as legal ones. And the switc

dumping packets from other users.

ccording to the requirements mentioned above, the switch can be configured as follows:

Switch(config)#am enable

Switch(config)#interface ethernet1/1

Switch(Config-If-Ethernet 1/1)#am port

witch(Config-If-Ethernet 1/1)#am ip-pool 10.10.10.1 10

Display the AM configuration information

of one port or all ports.

h will only forward data packets from legal users while