Planet WGSW-52040 Configuration Manual page 58

3. Configure IP address of SNMP management base
4. Configure engine ID
5. Configure user
6. Configure group
7. Configure view
8. Configuring TRAP
9. Enable/Disable RMON
1. Enable or disable SNMP Agent server function
Command
Global Mode
snmp-server enabled
no snmp-server enabled
2. Configure SNMP community string
Command
Global Mode
snmp-server community {ro | rw} {0 | 7}
<string> [access {<num-std>|<name>}]
[ipv6-access
{<ipv6-num-std>|<ipv6-name>}] [read
<read-view-name>] [write
<write-view-name>]
no snmp-server community <string>
[access {<num-std>|<name>}]
[ipv6-access
{<ipv6-num-std>|<ipv6-name>}]
3. Configure IP address of SNMP management station
Command
Global Mode
snmp-server securityip { <ipv4-address> |
<ipv6-address> }
no snmp-server securityip
{ <ipv4-address> | <ipv6-address> }
Explanation
Enable the SNMP Agent function on the
switch; the no command disables the SNMP
Agent function on the switch.
Explanation
Configure the community string for the switch;
the no command deletes the configured
community string.
Explanation
Configure IPv4/IPv6 security address which is
allowed to access the switch on the NMS; the
no command deletes the configured security
address.
4-11