ipv6 dhcp relay subscriber-id option
no ipv6 dhcp relay subscriber-id option
ipv6 dhcp relay remote-id delimiter WORD
no ipv6 dhcp relay remote-id delimiter
ipv6 dhcp relay subscriber-id select (sp | sv | pv |
spv) delimiter WORD (delimiter WORD |)
no ipv6 dhcp relay subscriber-id select delimiter
Layer3 Interface configuration mode
ipv6 dhcp relay remote-id <remote-id>
no ipv6 dhcp relay remote-id
ipv6 dhcp relay subscriber-id <subscriber-id>
no ipv6 dhcp relay subscriber-id
command disables it.
This command enables the
switch relay to support the
option 38, the no form of this
command disables it.
Configures user configuration
options to generate remote-id.
The no command restores to
its original default
configuration, i.e. enterprise
number together with vlan
MAC.
Configures user configuration
options to generate
subscriber-id. The no
command restores to its
original default configuration,
i.e. vlan name together with
port name.
This command is used to set
the form of adding option 37 in
received DHCPv6 request
packets, of which <remote-id>
is the content of remote-id in
user-defined option 37 and it is
a string with a length of less
than 128. The no operation
restores remote-id in option 37
to enterprise-number together
with vlan MAC address.
This command is used to set
the form of adding option 38 in
received DHCPv6 request
packets, of which
<subscriber-id> is the content
of subscriber-id in user-defined
option 38 and it is a string with
35-67