Planet WGSW-52040 Configuration Manual page 114

3. Enter port-channel configuration mode.
Command
Global Mode
interface port-channel
<port-channel-number>
4. Set load-balance method for port-group
Command
Aggregation port configuration mode
load-balance {src-mac | dst-mac | dst-src-mac |
src-ip | dst-ip | dst-src-ip}
5. Set the system priority of LACP protocol
Command
Global mode
lacp system-priority <system-priority>
no lacp system-priority
6. Set the port priority of the current port in LACP protocol
Command
Port mode
lacp port-priority <port-priority>
no lacp port-priority
7. Set the timeout mode of the current port in LACP protocol
Command
Port mode
lacp timeout {short | long}
no lacp timeout
Explanation
Enter port-channel configuration mode.
Explanation
Set load-balance for port-group.
Explanation
Set the system priority of LACP
protocol, the no command restores
the default value.
Explanation
Set the port priority in LACP protocol.
The no command restores the default
value.
Explanation
Set the timeout mode in LACP
protocol. The no command restores
the default value.
12-36