Table of Contents
Advertisement
connection is established. The information transferred on this connection is protected from
being intercepted and decrypted. The switch meets the requirements of SSH2.0. It supports
SSH2.0 client software such as SSH Secure Client and putty. Users can run the above
software to manage the switch remotely.
The switch presently supports RSA authentication, 3DES cryptography protocol and SSH user
password authentication etc.
4.2.2.2 SSH Server Configuration Task List
Command
Global Mode
ssh-server enable
no ssh-server enable
username <username> [privilege
<privilege>] [password [0 | 7]
<password>]
no username <username>
ssh-server timeout <timeout>
no ssh-server timeout
ssh-server authentication-retires
<authentication-retires>
no ssh-server authentication-retries
ssh-server host-key create rsa modulus
<moduls>
Admin Mode
terminal monitor
terminal no monitor
show crypto key
rypto key clear rsa
Explanation
Enable SSH function on the switch; the no
command disables SSH function.
Configure the username and password of
SSH client software for logging on the
switch; the no command deletes the
username.
Configure timeout value for SSH
authentication; the no command restores
the default timeout value for SSH
authentication.
Configure the number of times for retrying
SSH authentication; the no command
restores the default number of times for
retrying SSH authentication.
Generate the new RSA host key on the
SSH server.
Display SSH debug information on the SSH
client side; the no command stops
displaying SSH debug information on the
SSH client side.
Show the secret key of ssh.
Clear the secret key of ssh.
4-5
Advertisement
Table of Contents
Troubleshooting
