radius-server timeout <seconds>
no radius-server timeout
radius-server accounting-interim-update
timeout <seconds>
no radius-server
accounting-interim-update timeout
5. Configure the IP address of the RADIUS NAS
Command
Global Mode
radius nas-ipv4 <ip-address>
no radius nas-ipv4
radius nas-ipv6 <ipv6-address>
no radius nas-ipv6
47.3 RADIUS Typical Examples
47.3.1 IPv4 Radius Example
Figure 47-2: The Topology of IEEE802.1x configuration
A computer connects to a switch, of which the IP address is 10.1.1.2 and connected with a
To configure the timeout value for the
RADIUS server. The no form of this
command will restore the default
configuration.
To configure the update interval for
accounting. The no form of this command
will restore the default configuration.
Explanation
To configure the source IP address for the
RADIUS packets for the switch.
To configure the source IPv6 address for
the RADIUS packets for the switch.
10.1.1.2
10.1.1.1
Radius Server
47-178
10.1.1.3