Planet WGSW-52040 Configuration Manual page 256

next-server
[<address1>[<address2>[...<address8>
]]]
no next-server
[<address1>[<address2>[...<address8>
]]]
option <code> {ascii <string> | hex
<hex> | ipaddress <ipaddress>}
no option <code>
lease { days [hours][minutes] | infinite }
no lease
max-lease-time {[<days>] [<hours>]
[<minutes>] | infinite}
no max-lease-time
Global Mode
ip dhcp excluded-address
<low-address> [<high-address>]
no ip dhcp excluded-address
<low-address> [<high-address>]
(3) Configure manual DHCP address pool parameters
Command
DHCP Address Pool Mode
hardware-address <hardware-address>
[{Ethernet | IEEE802|<type-number>}]
no hardware-address
host <address> [<mask> |
<prefix-length> ]
no host
client-identifier <unique-identifier>
no client-identifier
3. Enable logging for address conflicts
Configure the address of the server hosting
file for importing. The no command deletes
the address of the server hosting file for
importing.
Configure the network parameter specified
by the option code. The no command
deletes the network parameter specified by
the option code.
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the lease period allocated
to addresses in the address pool.
Set the maximum lease time for the
addresses in the address pool; the no
command restores the default setting.
Exclude the addresses in the address pool
that are not for dynamic allocation.
Explanation
Specify/delete the hardware address
when assigning address manually.
Specify/delete the IP address to be
assigned to the specified client when
binding address manually.
Specify/delete the unique ID of the user
when binding address manually.
31-35