Arp; Introduction To Arp; Arp Configuration Task List - Planet WGSW-52040 Configuration Manual

48-port 10/100/1000base-t + 4-port 100/1000x sfp managed switch

Hide thumbs Also See for WGSW-52040:

Table of Contents

Switch#config

Next hop use the partner IP address

Switch(config)#ip route 10.1.1.0 255.255.255.0 10.1.2.1

Next hop use the partner IP address

Switch(config)#ip route 10.1.4.0 255.255.255.0 10.1.3.1

Configuration of layer3 SwitchB

Switch#config

Switch(config)#ip route 0.0.0.0 0.0.0.0 10.1.3.2

In this way, ping connectivity can be established between PC-A and PC-C, and PC-B and

26.4 ARP

ARP (Address Resolution Protocol) is mainly used to resolve IP address to Ethernet MAC

address. Switch supports static ARP configuration.

ARP Configuration Task List:

1. Configure static ARP

Interface Configuration Mode

arp <ip_address> <mac_address>

no arp <ip_address>

Configures a static ARP entry; the no

command deletes a static ARP entry.