Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Configuration Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Planet WGSW-52040
Summary of Contents for Planet WGSW-52040
- Page 1 L2+ 48-Port 10/100/1000BASE-T + 4-Port 1000X SFP Managed Gigabit Switch WGSW-52040 Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Contents ..................3 2. Switch Management ..................4 3. Requirements ..................... 5 4. Terminal Setup ................... 6 5. Logon to the Console .................. 8 6. Configuring IP Address ................9 7. Starting Web Management .................11 8. Saving the Configuration ................13 9. Login the Managed Switch ................14 10. -
Page 3: Package Contents
1. Package Contents Thanks you for purchasing PLANET L2+ 48-Port 10/100/1000BASE-T + 4-Port 1000X SFP Managed Gigabit Switch, WGSW-52040. “Managed Switch” is also used to refer to the WGSW-52040 in this quick installation guide. Open the box of the Managed Switch and carefully unpack it. The box should contain the following items: The Managed Switch x 1... -
Page 4: Switch Management
2. Switch Management To set up the Managed Switch, the user needs to configure the Managed Switch for network management. The Managed Switch provides two management options: Out-of-Band Management and In-Band Management. Out-of-Band Management Out-of-band management is the management through Console interface. Generally, the user will use out-of-band management for the initial switch configuration, or when in-band management is not available. -
Page 5: Requirements
3. Requirements z Workstations running Windows XP/2003/Vista/7/8/2008, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. z Workstations are installed with Ethernet NIC (Network Interface Card) z Serial Port Connection (Terminal) The above Workstations come with COM Port (DB9) or USB-to-RS-232 converter. The above Workstations have been installed with terminal emulator, such as Hyper Terminal included in Windows XP/2003. -
Page 6: Terminal Setup
4. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem. -
Page 7: Logon To The Console
5. Logon to the Console Once the terminal is connected to the device, power on the Managed Switch, and the terminal will display “running testing procedures”. Then, the following message asks the login user name and password. The factory default user name and password are as follows as the login screen in Figure 5-1 appears. -
Page 8: Configuring Ip Address
(All switch configuration prompts are assumed to be “WGSW-52040” hereafter if not otherwise specified): WGSW-52040> enable WGSW-52040# config WGSW-52040(config)# interface vlan 1 WGSW-52040(Config-if-Vlan1)# ip address 192.168.1.254 255.255.255.0 The previous command would apply the follow settings for the Managed Switch. IPv4 Address: 192.168.1.254 Subnet Mask: 255.255.255.0 Figure 6-1 Configuring IPv4 Address Screen To check the current IP address or modify a new IP address for the Managed... - Page 9 Show the current IP address 1. On “WGSW-52040#” prompt, enter “show ip interface brief”. 2. The screen displays the current IP address, Subnet Mask and Gateway as shown in Figure 6-2. Figure 6-2 Showing IP information Screen If the IP is successfully configured, the Managed Switch will apply the new IP address setting immediately. You can access the Web interface of Managed Switch through the new IP address.
-
Page 10: Starting Web Management
7. Starting Web Management The Managed Switch provides a built-in browser interface. You can manage it remotely by having a remote host with Web browser, such as Microsoft Internet Explorer, Mozilla Firefox, Google Chrome or Apple Safari. PC / Workstation with Web Browser 192.168.0.x Managed Switch RJ45/UTP Cable IP Address: 192.168.0.100 Figure 7-1 IP Management Diagram... -
Page 11: Saving The Configuration
RAM to FLASH by write command or copy running-config startup- config command, so that the running configuration sequence becomes the start up configuration file, which is called configuration save. WGSW-52040> enable WGSW-52040# copy running-config startup-config Figure 8-1 Copying Running-config Startup-config Screen... -
Page 12: Login The Managed Switch
9. Login the Managed Switch 1. Use Internet Explorer 7.0 or above Web browser and enter IP address http://192.168.1.254 (that you have just set in console) to access the Web interface. 2. When the following dialog box appears, please enter the configured username “admin” and password “admin” (or the username / password you have changed via console). The login screen in Figure 9-1 appears. - Page 13 4. The Switch Menu on the left of the Web page lets you access all the commands and statistics the Switch provides. Now, you can use the Web management interface to continue the Switch management or manage the Managed Switch by console interface. Please refer to the user manual for more.
-
Page 14: Customer Support
10. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQ : http://www.planet.com.tw/en/support/faq.php?type=1 Switch support team mail address : support_switch@planet.com.tw WGSW-52040 User’s Manual http://www.planet.com.tw/en/support/download.php?type1=1&model=48634&type=3 Copyright © PLANET Technology Corp. 2015.
Need help?
Do you have a question about the WGSW-52040 and is the answer not in the manual?
Questions and answers