Table of Contents
Advertisement
2. Configure the port-base LLDP function switch
Command
Port Mode
lldp enable
lldp disable
3. Configure the operating state of port LLDP
Command
Port Mode
lldp mode (send|receive|both|disable)
4. Configure the intervals of LLDP updating messages
Command
Global Mode
lldp tx-interval <integer>
no lldp tx-interval
5. Configure the aging time multiplier of LLDP messages
Command
Global Mode
lldp msgTxHold <value>
no lldp msgTxHold
6. Configure the sending delay of updating messages
Command
Global Mode
lldp transmit delay <seconds>
no lldp transmit delay
Explanation
Configure the port-base LLDP function
switch.
Explanation
Configure the operating state of port
LLDP.
Explanation
Configure the intervals of LLDP updating
messages as the specified value or
default value.
Explanation
Configure the aging time multiplier of
LLDP messages as the specified value or
default value.
Explanation
Configure the sending delay of updating
messages as the specified value or
default value.
11-28
Advertisement
Table of Contents
Troubleshooting
