Table of Contents
Advertisement
Command
Global Mode
dot1x enable
no dot1x enable
dot1x privateclient enable
no dot1x privateclient enable
dot1x user free-resource
<prefix> <mask>
no dot1x user free-resource
dot1x unicast enable
no dot1x unicast enable
2. Access management unit property configuration
1) Configure port authentication status
Command
Port Mode
dot1x port-control
{auto|force-authorized|force-
unauthorized }
no dot1x port-control
2) Configure port access management method
Explanation
Enables the 802.1x function in the switch and ports; the no
command disables the 802.1x function.
Enables the switch force client software using private
802.1x authentication packet format. The no command will
disable this function.
Sets free access network resource for unauthorized dot1x
user. The no command close the resource.
Enable the 802.1x unicast passthrough function of switch;
the no operation of this command will disable this function.
Explanation
Sets the 802.1x authentication mode; the no command
restores the default setting.
42-149
Advertisement
Table of Contents
Troubleshooting
