Table of Contents
Advertisement
2) Configure MRPP ring
3) Configure the query time of MRPP
4) Configure the compatible mode
5) Display and debug MRPP relevant information
1) Globally enable MRPP
Command
Global Mode
mrpp enable
no mrpp enable
2) Configure MRPP ring
Command
Global Mode
mrpp ring <ring-id>
no mrpp ring <ring-id>
MRPP ring mode
control-vlan <vid>
no control-vlan
node-mode {master | transit}
hello-timer < timer>
no hello-timer
fail-timer <timer>
no fail-timer
enable
no enable
Port mode
mrpp ring <ring-id> primary-port
no mrpp ring <ring-id> primary-port
mrpp ring <ring-id> secondary-port
no mrpp ring <ring-id> secondary-port
3) Configure the query time of MRPP
Explanation
Globally enable and disable MRPP.
Explanation
Create MRPP ring. The "no" command
deletes MRPP ring and its configuration.
Configure control VLAN ID, format "no"
deletes configured control VLAN ID.
Configure node type of MRPP ring (primary
node or secondary node).
Configure Hello packet timer sending from
primary node of MRPP ring, format "no"
restores default timer value.
Configure Hello packet overtime timer
sending from primary node of MRPP ring,
format "no" restores default timer value.
Enable MRPP ring, format "no" disables
enabled MRPP ring.
Specify primary port of MRPP ring.
Specify secondary port of MRPP ring.
55-15
Advertisement
Table of Contents
Troubleshooting
