Table of Contents
Advertisement
telnet-server enable
no telnet-server enable
username <user-name> [privilege
<privilege>] [password [0 | 7] <password>]
no username <username>
aaa authorization config-commands
no aaa authorization config-commands
authentication securityip <ip-addr>
no authentication securityip <ip-addr>
authentication securityipv6 <ipv6-addr>
no authentication securityipv6
<ipv6-addr>
authentication ip access-class
{<num-std>|<name>}
no authentication ip access-class
authentication ipv6 access-class
{<num-std>|<name>}
no authentication ipv6 access-class
authentication line {console | vty | web}
login method1 [method2 ...]
no authentication line {console | vty | web}
login
authentication enable method1
[method2 ...]
no authentication enable
authorization line {console | vty | web}
exec method1 [method2 ...]
no authorization line {console | vty | web}
Enable the Telnet server function in the
switch: the no command disables the
Telnet function.
Configure user name and password of
the telnet. The no form command deletes
the telnet user authorization.
Enable command authorization function
for the login user with VTY (login with
Telnet and SSH). The no command
disables this function. Only enabling this
command and configuring command
authorization manner, it will request to
authorize when executing some
command.
Configure the secure IP address to login
to the switch through Telnet: the no
command deletes the authorized Telnet
secure address.
Configure IPv6 security address to login
to the switch through Telnet; the no
command deletes the authorized Telnet
security address.
Binding standard IP ACL protocol to login
with Telnet/SSH/Web; the no form
command will cancel the binding ACL.
Binding standard IPv6 ACL protocol to
login with Telnet/SSH/Web; the no form
command will cancel the binding ACL.
Configure authentication method list with
telnet.
Configure the enable authentication
method list.
Configure the authorization method list
with telnet.
4-3
Advertisement
Table of Contents
Troubleshooting
