Table of Contents
Advertisement
Global Mode
am enable
no am enable
2. Enable AM function on an interface
Command
Port Mode
am port
no am port
3. Configure the forwarding IP
Command
Port Mode
am ip-pool <ip-address> <num>
no am ip-pool <ip-address> <num>
4. Configure the forwarding MAC-IP
Command
Port Mode
am mac-ip-pool <mac-address>
<ip-address>
no am mac-ip-pool <mac-address>
<ip-address>
5. Delete all of the configured IP or MAC-IP or both
Command
Global Mode
no am all [ip-pool|mac-ip-pool]
6. Display relative configuration information of AM
Globally enable or disable AM function.
Explanation
Enable/disable AM function on the port.
When the AM function is enabled on the
port, no IP or ARP message will be
forwarded by default.
Explanation
Configure the forwarding IP of the port.
Explanation
Configure the forwarding MAC-IP of the
port.
Explanation
Delete MAC-IP address pool or IP
address pool or both pools configured by
all users.
44-165
Advertisement
Table of Contents
Troubleshooting
