3.
Clear dynamic address table
Command
Admin Mode
clear mac-address-table dynamic [address
<mac-addr>] [vlan <vlan-id>] [interface
[ethernet | portchannel] <interface-name>]
4.
Configure MAC learning through CPU control
Command
Global Mode
mac-address-learning cpu-control
no mac-address-learning cpu-control
show collision-mac-address-table
Admin Mode
clear collision-mac-address-table
21.3 Typical Configuration Examples
Figure 22-3: MAC Table typical configuration example
Explanation
Clear the dynamic address table.
Explanation
Enable MAC learning through CPU
control, the no command restores that
the chip automatically learn MAC
address.
Show the hash collision mac table.
Clear the hash collision mac table.
21-110