Planet WGSW-52040 Configuration Manual page 241

4. Configure trusted IP
Command
Global configuration mode
anti-arpscan trust ip <ip-address>
[<netmask>]
no anti-arpscan trust ip <ip-address>
[<netmask>]
5. Configure automatic recovery time
Command
Global configuration mode
anti-arpscan recovery enable
no anti-arpscan recovery enable
anti-arpscan recovery time <seconds>
no anti-arpscan recovery time
6. Display relative information of debug information and ARP scanning
Command
Global configuration mode
anti-arpscan log enable
no anti-arpscan log enable
anti-arpscan trap enable
no anti-arpscan trap enable
show anti-arpscan [trust <ip | port |
supertrust-port> | prohibited <ip | port>]
Admin Mode
debug anti-arpscan <port | ip>
no debug anti-arpscan <port | ip>
Explanation
Set the trust attributes of IP.
Explanation
Enable or disable the automatic
recovery function.
Set automatic recovery time.
Explanation
Enable or disable the log function of ARP
scanning prevention.
Enable or disable the SNMP Trap function
of ARP scanning prevention.
Display the state of operation and
configuration of ARP scanning prevention.
Enable or disable the debug switch of ARP
scanning prevention.
27-20