Table of Contents
Advertisement
Global configuration mode
uldp hello-interval <integer>
no uldp hello-interval
7. Configure the interval of Recovery
Command
Global configuration mode
uldp recovery-time <integer>
no uldp recovery-time <integer>
8. Reset the port shut down by ULDP
Command
Global configuration mode or port
configuration mode
uldp reset
9. Display and debug the relative information of ULDP
Command
Admin mode
show uldp [interface ethernet IFNAME]
debug uldp fsm interface ethernet
<IFname>
no debug uldp fsm interface ethernet
<IFname>
debug uldp error
no debug uldp error
Configure the interval of Hello messages,
ranging from 5 to 100 seconds. The value
is 10 seconds by default.
Explanation
Configure the interval of Recovery reset,
ranging from 30 to 86400 seconds. The
value is 0 second by default.
Explanation
Reset all ports in global configuration
mode;
Reset the specified port in
port configuration mode.
Explanation
Display ULDP information. No parameter
means to display global ULDP information.
The parameter specifying a port will display
global information and the neighbor
information of the port.
Enable or disable the debug switch of the
state machine transition information on the
specified port.
Enable or disable the debug switch of error
information.
10-22
Advertisement
Table of Contents
Troubleshooting
