Planet WGSW-52040 Configuration Manual page 431

Global mode
vacl mac access-group {<700-1199> |
WORD} {in | out} [traffic-statistic] vlan
WORD
no vacl mac access-group {<700-1199> |
WORD} {in | out} vlan WORD
3. Configure VLAN-ACL of MAC-IP
Command
Global mode
vacl mac-ip access-group {<3100-3299> |
WORD} {in | out} [traffic-statistic] vlan
WORD
no vacl mac-ip access-group
{<3100-3299> | WORD} {in | out} vlan
WORD
4. Configure VLAN-ACL of IPv6 type
Command
Global mode
vacl ipv6 access-group (<500-699> |
WORD) {in | out} (traffic-statistic|) vlan
WORD
no ipv6 access-group {<500-699> | WORD}
{in | out} vlan WORD
5. Show configuration and statistic information of VLAN-ACL
Command
Admin mode
show vacl [in | out] vlan [<vlan-id>]
6. Clear statistic information of VLAN-ACL
Command
Configure or delete MAC VLAN-ACL.
(Egress filtering is not supported by
switch.)
Explanation
Configure or delete MAC-IP VLAN-ACL.
(Egress filtering is not supported by
switch.)
Explanation
Configure or delete IPv6 VLAN-ACL.
(Egress filtering is not supported by
switch).This switch only supports the
ipv6 standard acl.
Explanation
Show the configuration and the statistic
information of VACL. (Egress filtering is
not supported by switch.)
Explanation
53-2