Chapter 68 Debugging and Diagnosis for
68.1 Introduction to Debugging and Diagnosis for Packets
Received and Sent by CPU
The following commands are used to debug and diagnose the packets received and sent by CPU, and are
supposed to be used with the help of the technical support.
68.2 Debugging and Diagnosis for Packets Received and Sent
by CPU Task List
Command
Global Mode
cpu-rx-ratelimit protocol
<protocol-type> <packets>
no cpu-rx-ratelimit protocol
[ <protocol- type> ]
clear cpu-rx-stat protocol
[ <protocol-type> ]
Admin Mode
show cpu-rx protocol
[ <protocol-type> ]
debug driver {receive|send}
[interface {<interface-name>
|all}] [protocol {<protocol-type>
|discard |all}][detail]
no debug driver {receive |send}
Packets Received and Sent by CPU
Explanation
Set the max rate of the CPU receiving packets of the
protocol type, the no command set the max rate to default.
Clear the statistics of the CPU received packets of the
protocol type.
Show the information of the CPU received packets of the
protocol type.
Turn on the showing of the CPU receiving or sending packet
informations.
Turn off the showing of the CPU receiving or sending packet
informations.
68-74