Ipv6 Source Guard; Ipv6 Source Guard Configuration - Planet WGS-5225-8P2SV User Manual

4.5.9 IPv6 Source Guard

4.5.9.1 IPv6 Source Guard Configuration

This page provides IPv6 Source Guard related configuration. The IPv6 Source Guard Configuration screen in
appears.
Figure 4-5-30: IPv6 Source Guard Configuration Screen Page Screenshot
The page includes the following fields:
Object
 Mode
 Port Mode Configuration
 Max Dynamic Clients
Buttons
: Click to apply changes
Please note:
Enabling this function requires you to change the Key Type to "MAC and IP Address" for all ports that will
receive DHCPv6 packets. You can do this in the QoS Port Classification page.
Description
Enable or disable the IPv6 Source Guard globally.
The table shows all ports on the device. There IPv6 Source Guard can be
enabled/disabled on individual ports. Only when both Global Mode and Port Mode on a
given port are enabled, IPv6 Source Guard is enabled on this given port.
Specify the maximum number of dynamic clients that can be learned on given port. This
value can be 0, 1, 2 or unlimited. If the port mode is enabled and the value of max
dynamic client is equal to 0, only IPv6 packets that are matched in static entries on the
specific port are forwarded.
: Click to translate all dynamic entries to static entries.
User's Manual of WGS-5225-8P2S Series
373
Figure 4-5-30