Details Of The Settings Menu Screen; Printing Menu - SATO Cl4NX Operator's Manual

4 Operation and Configuration

4.4 Details of the Settings Menu Screen

4.4.1

Printing Menu

In the Printing menu, there are setting items as follows:
Printing
1 Label Length
2 Label Width
3 Auto Measure
4 Ribbon
5 Ribbon Near End
6 Speed
7 Sensor Type
8 Auto-mode
9 Print Mode
10 Backfeed
11 Eject Cut
12 Darkness Range
13 Darkness
14 Imaging
15 Advanced
68
CL4NX Operator Manual
Set the length of the media.
Set the width of the media.
Measure the length of media automatically.
Set whether to use ribbon or direct thermal
paper to print.
Enable or disable the warning when the ribbon
is about to run out.
*Shows if you have selected Use Ribbon in
Ribbon menu.
Set the print speed.
Set the type of media sensor.
Set the print mode automatically.
Set the print mode manually.
Set the backfeed.
Set the time from the print completion until the
print cut.
*Shows if you have selected Cut & Print in
Print Mode menu.
Set the range of the print darkness.
Set the print darkness.
Set the print reference position in the vertical
and horizontal directions.
Set the sensor operation and print motion.