Rear View - SATO S84ex Operator's Manual

1.2.2

Rear View

14
13
12
11
10
9
S84-ex/S86-ex
(Americas: Opposite/Left Hand,
Europe/Asia: Right Hand) printer

Wireless LAN (optional) antenna
To install the optional wireless LAN antenna.

Fan filter
To prevent dust from entering the printer.

AC input terminal
Supplies power to the printer through the
inserted power cord.
Before connecting, make sure that the AC
voltage of your region is in the range of AC 100
to 240 V, 50 to 60 Hz.

RS-232C connector
To connect the printer to the host computer
using the RS-232C serial interface.

IEEE1284 connector
To connect the printer to the host computer
using the IEEE1284 interface.

LAN connector
To connect the printer to the host computer
using the LAN interface.
6
7
8
S84-ex/S86-ex
(Americas: Standard/Right Hand,
Europe/Asia: Left Hand) printer

SD CARD slot
To install an SD card for additional memory.
CAUTION
Be sure to perform a virus check for the SD card
before connecting it to the printer. SATO
Corporation shall not be held responsible for a
malfunction of the printer caused by a virus infection
through the SD card.

USB connector (Type B)
To connect the printer to the host computer
using the USB interface.

EXT connector (External signal
interface)
Interface connector for external signals.
Connect the optional applicator to this terminal.
S84-ex/S86-ex Operator Manual
1 Parts Identification
9
10
11
12
13
14
17