Cleaning Interval - SATO Cl4NX Operator's Manual

Clean Printhead
System > Notifications > Clean Printhead > Clean Printhead
Enable or disable the notification function about the cleaning timing of the
print head.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.

Cleaning Interval

System > Notifications > Clean Printhead > Cleaning Interval
Set the notification interval about the cleaning timing of the print head.
Available to change if you have selected Enabled in Clean Printhead
menu
The printer shows the print distance as the setting value.
The setting range is 10 to 1000 m.
Change Printhead
System > Notifications > Change Printhead
Notify the replacement timing of the print head.
The setting items are as follows:
1 Change Printhead
2 Printhead Interval
3 Printhead Count
Change Printhead
System > Notifications > Change Printhead > Change Printhead
Enable or disable the notification function about the replacement timing of
the print head.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.
Enable or disable the notification function about
the replacement timing of the print head.
Set the notification interval about the replace-
ment timing of the print head.
Shows the current print distance.
4 Operation and Configuration
CL4NX Operator Manual
147