Cleaning Using The Cleaning Sheet - SATO S84-ex Operator's Manual
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
7.2.3
Cleaning Using the Cleaning Sheet
The cleaning procedure using the cleaning sheet is as follows:
Note
The cleaning sheet is optional. Contact your SATO reseller or technical support center to purchase the
options.
For details on the cleaning sheet, refer to the manual attached to the cleaning sheet.
1
Make sure that the product is in power off
mode, then disconnect the power cord
from the AC outlet.
2
Open the top cover.
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
3
Turn the head lock lever clockwise to
unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
4
Place the cleaning sheet between the
print head and the platen roller.
Note
Align the rough side of the cleaning sheet adjacent to
the print head.
7 Maintenance
2
S84-ex/S86-ex Operator Manual
1
289
Advertisement
Table of Contents
Troubleshooting
