12. Remove the panel cushion.
UL tape
W8L25
13. Install the removed parts by reversing steps of removal.
2-13-8.
DR-670 Board/RM-237 Board/RM-238 Board
Preparation
1.
Remove the handle (upper) case assembly. (Refer to
2.
Remove the EVF case assembly and rear (cold) shoe. (Refer to
Procedure
1.
Remove the two precision screws (M2 x 4) to detach the DR-670 board.
Precision screws
(M2 x 4)
2.
Disconnect the HN-404 board from the connector CN100 on the RM-237 board.
PMW-160/PMW-150/PMW-EX260
Panel retainer
Panel ground plate
LCD panel
Panel cushion
"2-13-2. Control Switch Block
DR-670 board
(GZ92000)".)
"2-13-4. EVF Case
Assembly".)
2-32