Lps Does Not Boot (System Controller Terminal) - Xerox DocuPrint 96 Operator's Manual

LPS does not boot (system controller terminal)

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
If you have followed the procedure for powering on and booting the
LPS, but the system does not boot properly:
Step 1. Press the <CAPSLOCK> key on the system controller keyboard.
Step 2. Press the Boot button on the operator control panel (see figure 11-
33).
Figure 11-33.Boot button on the operator control panel
Step 3. Reenter the BOOT command.
If the system still does not boot, call for service.
PROBLEM SOLVING TASKS
11-27