File Protection - Xerox DocuPrint 96 Operator's Manual

File protection

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
•
Place the volume/serial number label on the side of the
cartridge opposite the file-protect selector and the customer
label on the top surface of the cartridge. Use the recessed
areas provided for them. When you want a new label on a
cartridge, remove the old one before you put on a new one.
Figure 6-31 shows the 1/2 inch cartridge tape labels.
Figure 6-31. 1/2 inch cartridge tape labels
•
Write on labels with markers that do not smear. Use only labels
that leave no residue when removed.
A 1/2 inch cartridge tape has a thumbwheel on the side of the
cartridge that allows you to protect or write on a tape. When the white
dot is showing in the window, the cartridge is protected and you can
perform only read functions. When the white dot is not showing, you
can both read and write on that tape. Figure 6-32 shows a 1/2 inch
cartridge that is file protected (white dot showing).
Figure 6-32. File-protected 1/2 inch cartridge
OFFLINE PRINTING TASKS
6-21