Set tray size
Set Tray Size task
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Use this task to tell the printer that custom size paper is loaded in a
feeder tray.
Enter the following command:
SET TRAY n,w,l
Table 8-6 lists each parameter and its description.
Table 8-6.
SET TRAY command parameters and descriptions
Parameter
Description
n
The tray you want to modify.
w
The new width in millimeters.
l
The new length in millimeters.
STATUS AND PRINT TASKS
8-11