Xerox DocuPrint 96 Operator's Manual page 241

HIP jobs status
HIP Jobs Status task
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Use this task to display a list of the jobs in the HIP job queue.
Enter the following command:
HIP SHOW JOBS [parameter]
This command displays the current status of the selected jobs in the
HIP jobs queue as well as the current status of the HIP processor.
The format of the display depends on the parameter.
Table 7-2 lists each parameter and its description.
Table 7-2. HIP SHOW JOBS command parameters and
descriptions
Parameter Description
ABORTED Display all jobs that have been aborted.
ACTIVE Display all jobs in the active state: QUEUED,
ACTIVE, OQUEUED, or PRINTING.
ALL Display all jobs in all queues.
CANCELLED Display all jobs that have been cancelled.
COMPLETED Display jobs in a completed state: PRINTED,
STORED, SEND, or ABORTED.
CONTINUE Continue a previously requested display if all
jobs in the queue were not displayed.
PAGE[ n ] Divide the queue up to 20 jobs, which are
ordered from the oldest completed job to newest
completed job received.
PENDING Display all jobs in the pending state: PENDING
or RECEIVING (but not submitted to the OCS).
PRINTED Display the jobs in the printed state: PRINTED or
TRUNCATED.
SENT Display all files that have been sent to the host.
STORED Display all files that have been stored by the
host.
SUMMARY Display a summary of the job queue. (See figure
7-1.)
HIP PRINTING TASKS
7-7